™
Hard Plastics
With ETEC’s family of hard plastics, you get the dimensional accuracy, surface quality and speed of the world’s leading DLP printing systems, along with material properties rivaling leading thermoplastic materials (e.g. ABS, PA12, ULTEM, and TPU).
So whether you’re looking to mass-produce housings or couplings – ETEC has you and your applications covered!
E-Rigid Form
Polyurethane-like resin with high strength and stiffness
E-RigidForm is a polyurethane-like resin that 3D prints strong, hard, and stiff end-use parts. E-RigidForm has high tensile strength, delivers good heat deflection, and is water-resistant. E-RigidForm is a versatile and tough material that is ideal for for a wide range of industrial and consumer applications.
Material Properties
Value
Tensile Strength
68-73 MPa
Tensile Modulus
2950-3250 MPa
Elongation at Break
6%
Impact Strength (Notched)
30 J/m
Heat Deflection Temperature
at 1.181 MPa 62.5°C
LOCTITE E-3843
Semi-flexible ABS-like material with high impact strength and excellent surface finish
LOCTITE® E-3843 is an ideal material for end use parts production or functional prototyping. An ETEC-validated material from Henkel, E-3843 is a high-performance, high-modulus product which boasts excellent flexural and tensile properties with a relatively high degree of elongation. It offers good impact resistance and thermal stability making it suitable for many demanding engineering applications. E-3843 is available in black or white.
Material Properties
Value
Tensile Strength
60 MPa
Tensile Modulus
1890 MPA
Elongation at Break
47%
Impact Strength (Notched)
53.8 J/m
Heat Deflection Temperature
at 0.455 MPa 56°C
LOCTITE IND 405
High-strength engineering plastic, good for end-use part and tooling
A high-strength engineering plastic with good impact resistance and excellent surface finish. Ideal for a wide variety of tools on the production floor as well as end-use functional high production parts in a variety of industries. IND 405 is available in black or clear.
Material Properties
Value
Tensile Strength
52 MPa
Tensile Modulus
1300 MPa
Elongation at Break
127%
Impact Strength (Notched)
72 J/m
Heat Deflection Temperature
at 0.455 MPa 53° C
RC Series
Ceramic-filled, high-temperature resins for tough and stiff parts at extremely high resolutions.
ETEC’s RC materials contain ceramic particles allowing for tough and stiff parts with high-temperature resistance. The ability to create parts at very high resolutions makes these materials ideal for applications like custom connectors and high detail mold masters. The wide variety of finishing methods for these materials – including painting and plating – make them popular for animation applications.
Material Properties
Value
Tensile Strength
39 MPa
Elongation at Break
2.9 %
Heat Deflection Temperature
at 0.455 MPa 93° C
Loctite MED 413
Tough, medical-grade photopolymer capable of meeting biocompatibility standards
LOCTITE® MED413 is a medical-grade, high-modulus photopolymer capable of meeting ISO 10993-5 & -10 standards for biocompatibility that delivers excellent flexural and tensile properties. Stiffness combined with toughness makes this material ideal for use in a wide variety of impact-resistant medical devices.
Material Properties
Value
Tensile Strength
40 MPa
Tensile Modulus
1600 MPa
Elongation at Break
50%
Impact Strength (Notched)
59 J/m
Heat Deflection Temperature
at 0.455 MPa 70°C
